TUBE MOUNTING MANUAL(TB/LT, Bending Valve)

How to Mount Tubes to Tires and Wheels?

1. Check the items ready or not:Tire,Rim,Flap,Inner tube,Rubber Hammer,Lubricant and Brush,Flat-head Screwdrivers.

2. Check the tube and the flap

  Check the appearance of the tube and flap are okay.

  Make sure the size of the tube and flap matches the size of the tire.

3. Check the rim and the tire

  Ensure if the rim size is correct and examine the rim and the lock ring for any defects.

  Ensure that no foreign materials exist inside the tire and the appearance of the tire beads is satisfactory.

4. Tube and flap Mounting

  Put the tube in the tire with the air-injection valve facting upward.

  Insert the valve into the hole of the flap and insert the tube into the tire in a wrapping manner.

  Take extra care not to wrinkle or fold the side of the flapedge and tube.

5. Applying lubricant

Lubricant can be used on the tire beads before mounting the rim(Recommended minimally)

6. Rim mounting

Place the rim on the floor,tilt the tire and insert the valve into the rim slot.

Press both sides of the tire until it fits the rim.

7. Locak ring mounting

Fasten the lock ring inside the rim.

8. Final confirmation

Pushing the opposite side of the fixed lock ring with a tool,mount it by tapping with rubber hammer.Be careful of your safety.